Skip to content

Run the show

The Operator console is where you run a live Room: who is on, what fans’ phones do, what the venue screen shows, and the chat. This page covers each part of it.

Open the console

In the web app, open the Room from its card on the Rooms page, or choose Enter Room on a live event’s page. The console fills the window. The desktop app opens straight onto it and can also put the Room on a physical screen → Venue displays & signage.

The top bar shows where the show stands: live or not, the Room code, the act on stage, and how many people are in the Room. Beside that sit the Phone lock control, Panes, End show and Exit. Exit leaves the console and the Room keeps running; End show closes the Room for everyone → Set up a Room.

Panes

The console is made of panes:

PaneWhat it is for
TransportPrevious, Next and Go to end: step the show along
Running orderThe whole night, act by act, with Go Live on each act
Walk-upsOpen mic sign-ups, and the Sign-up screen
RequestsSong requests for your act
Join codeThe Room code and QR, full screen on a tap
Output previewWhat the venue screen is showing, with Blackout, Display chat and Showing
DisplaysPut the Room on a screen; choose the signage loop and the Visualizer
ChatThe Room’s chat, your own messages to it, Chat lock and polls
AudienceWho is in the Room, and announcements

Hide a pane from its own menu (Hide pane) or from Panes in the top bar, which also has Reset layout. Pop out opens a pane in its own window that you can drag to another monitor, such as a touch screen beside the desk. Drag the gaps between panes to resize them. Your layout is saved on that device.

Some panes only appear when there is something for them to do, and come back on their own when there is:

  • Walk-ups appears for an open mic, to someone who runs the event → Open mics.
  • Requests appears to the act’s own team, when the event takes song requests or you could turn them on → Song requests.
  • Output preview appears once a screen is showing the Room. Until then, Displays shows only the way to open one.

The Running order

The Running order lists the night in order: Pre-show, each act, a Changeover between acts, and Show end.

  • Go Live puts an act on. The venue screen shows its card, fans’ phones lock (see below), and fans earn that act’s Cheer. The act you most likely want next is marked Up next and its button is highlighted.
  • Setting Pre-show or a Changeover takes the act off: phones open again and the screen goes back to your signage loop, or to the bill if there is no loop.
  • Setting Show end puts a goodnight message on the screen, or keeps your signage loop playing if there is one. The Room stays open until you end the show.

Transport steps through the same list, so the two never disagree. An act still marked Pending can’t go live until it has said yes.

Change the lineup during the show

The bill can change while the Room is live. Each act has move up and move down arrows, and Edit lineup at the foot of the pane adds and removes acts. Changes reach the venue screen and fans’ phones straight away.

An act that has played is marked Played and stays where it is: it can’t be moved or removed, and nothing can move past it. The running order is the record of the night.

Anyone who can run the Room can go live, change over and post to the chat. Moving or adding acts needs someone who runs the event. An engineer handed the board for one night can run the show without being able to change who is on it.

Phone lock

When an act goes live, fans’ phones switch to a show screen: the act’s name, the song it is playing, and a few things that don’t pull eyes off the stage. Fans can raise the lighter, open the act’s profile and social links, visit its merch link, vote in a poll if one is up, and Request a song if the act takes requests. Chat and the store are closed, so nobody sets off an effect on the screen in the middle of a set.

A changeover opens the phones again. The control in the top bar shows the current state, Phones locked or Phones open; tap it to change it by hand. The next Go Live or changeover sets it again. Showliner enforces the lock itself, so an out-of-date phone can’t get around it.

Chat lock and Display chat

Chat lock, in the Chat pane’s header, stops fans posting. They can still read the chat and use the rest of the Room, and you can still post. Use it when the chat itself is the problem, or for a moment that should be quiet.

Display chat, under the Output preview, hides the chat from the venue screen. Fans keep chatting on their phones. More on both in Live chat & moderation.

What’s on the venue screen

The Output preview shows exactly what the venue screen shows. Under it are three controls:

  • Blackout turns the whole screen black, above everything else. Tap again to bring it back.
  • Display chat shows or hides the chat sidebar.
  • Showing picks what fills the middle of the screen.

Showing is Auto by default and follows the Running order: the bill before the show, the signage loop between sets, the act’s card (or the Visualizer, if you set one) while an act is on, and the goodnight message after the last act. You can hold one thing there instead: Nothing, Lineup order, Signage loop or Visualizer. A choice holds through Go Live and changeovers until you set it back to Auto, and the control keeps showing what you chose so you don’t forget it. Nothing leaves the middle empty while the QR code, lineup and chat stay.

The Visualizer

A Visualizer is a silent looping video that plays behind a set. In Displays, open the Visualizer row, paste a YouTube link or a link to a video file, and choose Set visualizer. Showliner stores the link, not the video. Choose how much of the screen it takes:

  • Video + act info: the act’s name and photo stay on screen, over the video.
  • Video only: hides the act info. QR code, lineup and chat stay.
  • Full screen: covers everything, including the QR code and chat.

Changing the placement mid-set doesn’t restart the video.

The signage loop

The signage loop plays your own panels between sets. Pick it from the Signage loop row in Displays, then choose Alongside room info or Full screen (which covers everything, including the QR code). Panels and loops are made in Digital Signage → Venue displays & signage.

Announcements

Post an announcement in the Audience pane puts a banner on fans’ phones: a Headline, optional details, and an optional link with your own button text. It is for the thing fans should tap, like a fundraiser or the merch store, so it goes to phones rather than to the screen. One is up at a time: Replace swaps it, the X takes it down, and it ends when the Room closes. You can also set one up ahead of time on the event page.

Polls

Ask a poll is in the Chat pane’s menu. The poll floats over the top of the chat while it runs → Polls.

On a phone

The console works at phone width, so a one-person open mic can run from a phone behind the bar. Panes stack into one scrolling column, and the top bar shrinks to the headcount, Phone lock (Locked or Open) and a menu holding the Panes list, Back to rooms and End show. Panes don’t pop out on a phone. Put the Join code pane full screen and leave the phone on the bar.